Oscillation Softening Machine Working Process

The oscillating softening machine is a special equipment for leather processing, which is mainly used to soften the leather and improve its feel and flexibility. The following is the working process of the oscillating softening machine, including the equipment structure, working principle and operation steps:

1. Equipment structure

The oscillating softening machine is mainly composed of the following parts:

Oscillating mechanism: Oscillating motion is generated through an eccentric wheel or a crank-connecting rod mechanism.

Clamping device: used to fix the two ends of the leather.

Transmission system: including motor, reducer and transmission belt, used to drive the oscillating mechanism.

Control system: used to adjust the oscillation frequency, amplitude and working time.

Frame: The structural frame that supports the entire equipment.

2. Working principle

The oscillating softening machine repeatedly stretches and bends the leather through mechanical oscillation to relax the leather fibers, thereby improving its softness and ductility. Its core principle is to use the mechanical force generated by the oscillating motion to rearrange the fiber structure inside the leather to achieve a softening effect.

3. Workflow

Step 1: Preparation

Check the equipment: Make sure that all parts of the oscillation softening machine (such as the clamping device, oscillation mechanism, and transmission system) are working properly.

Adjustment parameters: Set the oscillation frequency, amplitude, and working time according to the type and thickness of the leather.

Preheating equipment: If heating and softening are required, the heating device can be turned on in advance.

Step 2: Fix the leather

Spread the leather to be treated flat on the workbench to ensure that it is flat and wrinkle-free.

Use the clamping device to fix both ends of the leather to ensure that the leather does not fall off during the oscillation process.

Step 3: Start the equipment

Start the motor and the transmission system drives the oscillation mechanism to start working.

The reciprocating motion generated by the oscillation mechanism causes the leather to be repeatedly stretched and bent.

Step 4: Oscillation treatment

During the oscillation process, the leather fibers gradually relax and become soft.

According to the preset working time, the equipment runs automatically, and the operator can observe the status of the leather at any time.

Step 5: Stop the equipment

After the preset time is reached, the equipment automatically stops running.

Turn off the power, release the clamping device, and take out the treated leather.

Step 6: Check the effect

Check the softness and ductility of the leather to ensure the expected effect.

If the effect is not ideal, readjust the parameters and process again.

4. Notes

Parameter adjustment: Different types and thicknesses of leather require different oscillation frequencies and amplitudes, which need to be adjusted according to actual conditions.

Clamping force: The clamping device should be firm but not too tight to avoid damaging the leather.

Equipment maintenance: Regularly check the oscillation mechanism, transmission system and clamping device to ensure the normal operation of the equipment.

Safe operation: Avoid your hands from approaching the clamping device and oscillation mechanism during operation to prevent pinching.

5. Application scope

The oscillation softening machine is widely used in the leather processing industry and is suitable for the following scenarios:

Soften shoe upper leather, clothing leather, luggage leather, etc.

Improve the feel and ductility of leather.

Improve the processing performance and finished product quality of leather.

Through the above work process, the oscillation softening machine can efficiently soften the leather to meet the processing requirements of different products.